SHIPPING OUTSIDE THE U.S 
Please do not place a order without getting a shipping quote first otherwise your payment will be refunded MINUS the cost to refund.
Minimum order for outside the U.S $75.00

SETH THOMAS ANSONIA KIENINGER HERMLE JAUCH
CLOCKS AND CLOCK PARTS - NEW AND OLD

Call: 215 721-3076
Hours by appointment for our walk in customers

Ansonia shop regulator movement . Handshaft length 2 1/4 inches.  $65.00
   Shipping $10.00
sku# ASR

Kroeber Indicator Pendulum
 Total length 6 3/4"
Glass is clear and scratch free. It works as it should
$95.00   
Shipping 8.50
sku# kroeber pendulum 
sn

Original Ansonia  Pendulums
These just cleaned original pendulums date back to the 1880's
These were used in porcelain and metal mantel clocks
Total length is indicated below each pendulum
Use the pay-pal button located below the length of the pendulum to order
$21.00 each
 Shipping $2.95
n

1920's Original Gilbert Alarm Clock in Original Tin Can
 TRUE TIME CAPSULE
Alarm clock works when wound
Tin is in oustanding condition
Comes as pictured
 WAS $75.00
NOW $60.00
Shipping $10.00
sku# gilbert alarm tin
vr

Ansonia Bim-Bam 
 
8 day time and strike movement.
 1880's + mantel clock movement
Rack and snail strike count
All seems to work correctly but should have bushings or good parts movement
$45.00
Shipping $12.00
sku# Ansonia unmarked

Ansonia Reproduction
Winding Key
 
double ended winding key.
Fits the majority of Ansonia mantel and wall clocks.
One end is for winding and the other to regulate fast/slow.
$9.95
Shipping $2.95
sku# Ansonia reproduction key

Gilbert Dial for Open Escapement
Shows some age but overall in clean condition.
 Hinge on bezel is good, open and closes as it should.
 Glass in bezel.
5 7/8" total width
3 1/4"  center to center winding
$43.00
Shipping $8.00
sku# gilbert dial open escapement
ks

ALL OF OUR ITEMS LISTED BELOW ARE ORIGINAL  MANUFACTURER PARTS.
Some of the movements listed have been overhauled by Back In Time and are in proper working order and others are only bench tested meaning not set up and run with a pendulum. All bench tested movements will list any obvious defects
THE ONLY REPRODUCTION PARTS WE SELL ARE THE OFTEN LOST CLOCK KEYS AND PENDULUM BOBS.

Gilbert 8 Day Stops
 Includes screws
$20.00
Shipping $2.75
sku# gilbert stops

O V E R H A U L E D
Kroeber 8 Day Time
and Strike

Overhauled and in proper working order
All original
Tested and keeps time and strikes as it should
Measurements are center to center
Winding arbors 3 1/8" Center shaft to winding arbor 2"
$155.00
Shipping $11.00
sku#k overhaul
iv

Gilbert Porcelain Dial .
Measures 5 1/8" from the back
4" dial ring
Center to Center winding holes 3 3/16"
Center of winding holes to center of center shaft 2 1/16"
Clean dial, no cracks or hairlines.
Clean Glass
$60.00
Shipping $7.50
sku#gilbert porcelain dial
vn

Gilbert Case
Many good original parts on this case including original glass
Comes as pictured
23" in height (+/-)
$50.00
Shipping $15.00
sku# g case parts
en

ALL MOVEMENTS WE SELL ARE FREE OF MISSING TEETH, BENT PIVOTS,BENT GEARS,SOLDER AND PUNCH MARKS (UNLESS NOTED).
MOST MOVEMENTS ARE NOT BENCH TESTED
 (UNLESS NOTED) BUT DO PASS OUR CHECK FOR THE BASIC OPERATIONS OF A CLOCK MOVEMENT 

Ansonia Bim-Bam 8 Day Time & Strike
1880's Ansoina mantel clock movement
Rack and snail strike count
Tested for a extended period of time and all functions work correctly
$65.00
Shipping $12,00
sku# ansonia bimbam2
ve

Gilbert Gong & Base .
Used in many of the Gilbert high end wall and cabinet clocks
Deep Sounding Gong
Restored back to its original beauty
Total height 4 3/4"
Coiled gong can be moved by loosening the screw
 $42.50
Shipping $7.00
sku# gilbert gong base
kn

Ansonia 8 Day Bim-Bam
 
mantel clock movement
Stamped B22 on rear plate and also "The Ansonia Clock Co. New York, USA"
Everything seems to work when manually tested
Not bench tested.
$55.00
Shipping $12.00
sku#ansonnia B22 bim-bam
es

Original Ansonia Porcelain Dial
4  1/16" across
Center to center winding 2 1/16"
Center  winding to center shaft 1 9/16"
$35.00
Shipping $6.50
sku#ansonia porcelain dial 3
ki

Ansonia 8 Day Time & Strike Mantel Clock Movement 
Just Overhauled, Cleaned & Oiled
4 1/2" stamped on lower right

This movement came out of a metal case Ansonia Clock
Strikes once for the half hour and the hours on the hour
Notice the three mounting tabs for attaching to the case (lower left and right and top right)
Only use this movement if your old movement has 4 1/2" stamped on the lower right and the mounting tabs are at the same location.
New proper time mainspring installed  for accurate time keeping
$145.00
Shipping $10.00
sku# a overhaul move
en

 Original Ansonia Dial & Bezel
Large chip but good glass and bezel. Opens & closes perfectly. Round part that goes in clock opening is 4" with a 4 3/8" total width. Porcelain dial is 3".
Just swap out your good porcelain dial with this bad one and you have a beautiful complete assembly.
$45.00
Shipping $7.50
sku# a comp small dial
n

Gilbert Mantel Clock Dial
5 3/4" total width when measured from the back
3 1/4" center to center for the winding holes
2 1/8" center of winding hole to center of the center shaft
$55.00
Shipping $7.50
sku# gilbert dial4
er

Gilbert Mantel Clock Dial
5 7/8" total width when measured from the back
3 1/4" (+/-) center to center for the winding holes
2" (+/-) center of winding hole to center of the center shaft. Overall in nice condition.
$35.00
Shipping $7.50
sku# g dial3
kn

Kroeber 8 Day Time and Strike
Clean running condition
All original
Looks like it was never overhauled
Tested and keeps time and strikes as it should
Missing the fast/slow speed adjuster but you can use the adjustable pendulum bob adjuster.
$100.00
Shipping $11.00
sku#kroeber2 8 day
vu

Ansonia Time Only Calendar Movement       
Working perfectly
Notice how the movement sits on a angle in the case, not straight like the majority of movements.
 Yes this is the way it was designed.
 The middle picture shows the Ansonia wall calendar clock this movement was used in.
Use your exsisitig hands and pendulum leader
$70.00
Shipping $9.00
sku# a to calendar
is

Gilbert 8 Day Time & Strike
 Here is a interesting 8 day mantel clock movement. It seems someone made it into a quarter striker meaning it strikes the bim-bam once every 15 minutes then the the hours bim-bam on the hour. The modifications where soldered to the existing bim-bam arms but can be easily removed to make it original again.
Not bench tested but works when manually tested
$47.00
Shipping $12.00
sku# gilbert 8 day modified
ev

Kroeber Indicator Pendulum
 Total length 6 3/4"
Glass is clear and scratch free. It works as it should
$95.00   
Shipping 8.50
sku# kroeber pendulum 
sn

Ansonia Time Only Movement Missingg verge.
 All parts look good.
         Stamped A22.  
            
$40.00
Shipping $8.00
sku# AFP

Original Ansonia Porcelain Dial for Mantel Clocks
4" measured from the back
2 1/16 " on center for the winding arbors
1 9/16" on center from winding to center shaft
$33.00
Shipping 6.50
sku# a por 4

Ansonia 
These came off a Ansonia metal mantel clock
Bolt goes thru entire length
 6 5/8" total length

$35.00
Shipping 6.50
sku# a columns

Original Ansonia Complete Pendulum for Wall Clocks
Total length 11 1/2"
Wood stick with brass bob
Nice clean pendulum assembly used in many early Ansonia wall clocks
$60.00
Shipping 12.00
sku# ans wall pend

Original Gilbert Mantel  Clock Hands
w/hand nut as shown
Center of minute hand opening to end 2 1/2"
For mantel clocks that use a nut to hold the minute hand on.
$15.00
Shipping $2.95
sku# g mantel hands
n

Original Ansonia Crystal Regulator Gong
Good condition and excellent sound
Total length is 8 1/2". Can be adjusted up or down
$39.50
Shipping $7.50
sku# a cr gong
en

Original Ansonia 12 5/8" Wall Clock Dial
Shows it's 100+ years of service. For those that perfer the rustic look this is your dial
 This dial came from a Ansonia regulator "A" wall clock
2 1/4" center to center for the winding holes
2" center of the winding holes to center of the center shaft 
 
35.00
Shipping $8.00
sku# ansonia ts dial

SOLD

Ansonia Mounting Ring for Royal Bonn Porcelain Mantel Clocks
3 screws included that fasten the movement to the mounting ring as well as the tabs that hold the mounting ring to the case
 5 1/6" total width

$50.00
Shipping 10.00
sku# a mount ring
en

       4"

Ansonia Crystal Regulator Movement for Parts/Restoration
Super nice open escapement movement that someone for what ever reason put a incorrect pallet on. Can be seen on the left side when the picture is enlarged. Other than that all functions seem to work correctly when manually tested.
Good springs 
$49.50
Shipping $8.50
sku# a oe parts rest
vn

Ansonia 8 Day Time & Strike Movement.
 JUST OVERHAULED AND WORKING PERFECTLY
This is the older style movement Ansonia used prior going to the now familar looking tomb stone movement with a rounded top.
This came out of a metal Ansonia mantel clock and is attached to a wood board with a bell. These older Ansonia movements mounted on a board then the board mounted to the metal back plate of the case.
 Strikes the hours on a bell
3 1/8" on center winding arbors - 2" on center winding to center shaft 
Board size 6 1/8" x 5
 $155.00
Shipping $10.00
sku# a os w bell

  Ansonia Porcelain Open Escapement Dial & Bezel
This came off a crystal regulator with the Ansonia round movement
4  3/8" measured across the front - 2" on center winding arbors
Left winding arbor grommet missing and very small chip at this location - hard to see.
$47.50
Shipping
$7.50
sku#a cr dial2
in

SOLD

Original Ansonia Mantel Clock Hands
Minute hand total length 2 1/4"
Used with 5" dials
Comes with washer and taper pin
 $19.00
Shipping $2.95
sku# a hands2
n

Ansonia Porcelain Dial with Beveled Glass
6 11/16" total width measured from the back
Notice the three raised posts for screws located on the back. Also two raised tabs on the back which if you turned it around would be located at the 3 and 9:00 position
 Small touchup to porcelain at the 12:00 position.
Door opens and closes as it should and glass is scratch free
Winding holes 2" on center
Center shaft to winding 1 1/2" on center
$65.00
Shipping 10.00
sku# a 61116 por dial
er

Kroeber Gong
Nice original condition. Used in many Kroeber mantel clocks
3 3/8"
Includes screw
$13.00
Shipping $6.50
sku# kroeber gong
e

Kroeber LOUIS XIV case trim
Clean original condition
This is just for the trim as shown in lower picture case not included.
$32.00
Shipping $7.50
sku# kroeber trim
n

Kroeber Open Escapement Mantel Clock Movement
8 day time and strike movement
Strikes once for the half hour and strikes the hours on the hour.
Just overhauled and working perfectly
Center to center for winding arbors 3 1/8" (+/-)
Center of winding to center shaft 2" (+/-)
Mounting tabs on the front
Comes as shown
$160.00
Shipping $12.00
sku# k open escape
vr

Kroeber Rear Door Cover
Width (not including latch or screw hole)  4 3/8"
Width 4 7/8" (+/-) center of screw hole to center of latch
$17.00
Shipping $2.95
sku# kroeber rear door
n

  Original Ansonia Mantel Clock Hands
Minute hand total length  2"
 Used with 4" dials
$19.95
Shipping $2.95
sku#a hands1
n

SOLD

Kroeber 8 Day Time and Strike
Clean running condition
All original
Looks like it was never overhauled
Tested and keeps time and strikes as it should
$135.00
Shipping $11.00
sku#kroeber 8 day
k r n

<<< PURCHASE HERE

Ansonia 8 Day Small Round Movement
3 3 1/6" round
When manually tested all functions seem to work fine
but selling for parts repair.
Pivot holes look good.
$57.50
Shipping $7.00
sku# a small round mov
in

SOLD

PAYING WITH A MAJOR CREDIT CARD?
Select the pay-pal button located with the item you are purchasing. Once selected you can use any major credit card for your purchase. No need for a pay-pal account

4 1/4"
3 1/2"
3 3/4"
3 7/8"
4 1/2"
4 1/4"
2 7/8"
4"
5 5/8"

Early Gilbert Dial
GCC logo below the 12:00 position
and Gilbert Clock Co located below the 6:00 position
VERY EARLY SELDOM SEEN DIAL
Probably for a 30 hour shelf clock
2 7/8" center to center winding arbors
1 1/8" center of winding to center of center hole
5 1/2" total width
$50.00
Shipping $7.50 (small box)
sku#gilbert early
en

Ansonia PLUSH Clock Parts
Ansonia Statue Feet or PLUSH feet

SOLD
UPDATED 4/3 2015

SOLD

SOLD

SOLD

SOLD

SOLD

SOLD

Original Lion Sides with Brass Ring Pulls
These came off a Ansonia metal case mantel clock and where used on various Ansonia models
3" top to bottom of brass pull
$29.50
Shipping $7.50
sku# a lions brass pulls

SOLD

SOLD

Original backboard for the FLORENTINE No 3
Includes gong as shown
 $35.00
Shipping $8.50
sku# a plush board

SOLD

SOLD

SOLD

  Ansonia Porcelain Open Escapement Dial
This came off a crystal regulator with the Ansonia round movement
4  3/32" total width - 2" on center winding arbors
No cracks or chips
$47.50
Shipping
$7.50
sku#a cr dial
en

SOLD

SOLD

SOLD

SOLD

SOLD

Ansonia PLUSH 8 day time and strike movement. This came from a FLORENTINE No.3 but suspect it will fit other "PLUSH" models and Ansonia mantel models that have a movement that looks like this one.
Working perfectly
3 3/16" on center winding arbors
2" on center winding arbor to center shaft
 $95.00
Shipping $10.00
sku# a plush move

SOLD

SOLD

SOLD

SOLD